Wherever you live on our beautiful planet, welcome to SF blog hosted from Québec City! Today’s article shares preliminary results from a series of tests SF is conducting to understand performance of different thermal analysis cups for iron chemistry (with tellurium). The goal consists in investigating if there are differences between MeltCup and QuickCup that could influence your repeatability in %Carbon thermal analysis. Continue reading “How your MeltCup and QuickCup %C combustion analysis compare?”
Best thermal analysis cup : MeltCup and QuickCup comparison
Of course the MeltCupTM is less expensive than your current QuickCup® ! Still for your iron metallurgy control, this article summarizes why the MeltCup by MeltLabTM Systems wins as the best thermal analysis cup on the market. Continue reading “Best thermal analysis cup : MeltCup and QuickCup comparison”
Download SF thermal analysis presentation at Vancouver AFSbc and read SF news
Have you ever been there? Beautiful mountains, hikes, great kayaking… Vancouver area is a true natural wonder! Still, it was all about castings at the AFS Northwest regional congress last week. In this context, SF happily accepted the invitation and traveled 4,800km to give a lecture on thermal analysis for aluminum, iron and steel foundries and discuss why casting simulation goes hand-in-hand with thermal analysis for more profits.
Continue reading “Download SF thermal analysis presentation at Vancouver AFSbc and read SF news”
What is shrinkage casting defects ?
How do you correct your melt in order to control stability ? What is shrinkage casting defects potential in the melt ? In this article, we’re not referring to gating design, casting geometry or casting procedures. Today, let’s discuss the metallurgical shrinkage tendency of the melt itself. David Sparkman at MeltLab presented this theory at the Ductile Iron Society last October 2015.
Were you at the University Laval event on the physics of Thermal Analysis?
Last thursday January 28th, MetSoc student chapter at University Laval hosted this memorable beer and pizza event on the physics of thermal analysis, which was lectured by David Sparkman ( MeltLab). Can you tell what the gentleman on the left is holding on the photo? No, it’s not a beer funnel. Continue reading “Were you at the University Laval event on the physics of Thermal Analysis?”
Aluminum and Iron Microstructure by Thermal Analysis published by AFS
Did you know how aluminum and iron microstructure by thermal analysis can be predicted by the new MetlLab technology ? Indeed, since 1980 MeltLab adds value to aluminium, bronze steel and more exotic metal castings. Here’s the 2011 AFS paper by David Sparkman. In 2016, why not use the best tool to measure and correct your melt for consistent castings? Continue reading “Aluminum and Iron Microstructure by Thermal Analysis published by AFS”
What is recalescence and why you should care ?
In 2021, click here to use SF Thermal Analysis to measure recaleascence. Do you know what is recalescence on a cooling curve ? How easy it is for your foundry to become more profitable in 2016 by measuring recalescence before pouring your castings ? Continue reading “What is recalescence and why you should care ?”
MeltLab newsletter December 2015
